UHF band SSPAs

Find out all you need to know about SSPAs/BUCs in our product guide

Science

New generation of LDMOS based SSPAs for industrial, scientific & medical applications

Using ruggedized LDMOS technology, the new CW / PW SSPA family offers outstanding performance in indoor operations

uhf-science-products
TYPE TECHNOLOGY Psat FREQUENCY DATASHEET
UHF band indoor
SSPA LDMOS 500 W 500 MHz Download

echnical Specifications — Spaceborne SSPA Family

Parameter Specification
Frequency 500 MHz
Output Power (Psat) 500 W
Technology LDMOS (Laterally Diffused Metal Oxide Semiconductor)
Operation Modes CW (Continuous Wave) and PW (Pulsed Wave)
Configuration Indoor rack-mount
Cooling Air cooling and liquid cooling options available
Modularity Phase-combined configurations available for multi-kW output
Output Protection Built-in output isolator — full reflected power protection
M&C Interface Discrete digital and analog signal interfaces for telemetries, commands and alarms
Linearity High linearity with customisable linearity characteristics

Contact Celestia TTI for complete datasheet, phase-combined system configurations and custom specifications.

High-Power UHF Amplification for Industrial, Scientific and Medical Applications

Not all high-power RF amplifiers serve satellite uplinks. In particle accelerators, plasma generation systems, medical RF equipment, and industrial heating installations, the requirements are fundamentally different: continuous wave (CW) or pulsed operation at UHF frequencies, extreme ruggedness under impedance mismatch conditions, and the long operational lifetimes that scientific facilities demand from their infrastructure.

Celestia TTI’s UHF Band SSPA is built for exactly these applications. Operating at 500 MHz with 500W output power, it uses ruggedized LDMOS (Laterally Diffused Metal Oxide Semiconductor) technology — the semiconductor of choice for high-power, sub-GHz ISM and scientific applications. LDMOS RF power transistors are the most rugged of the three major RF technologies and can operate into impedance mismatches greater than 65:1 when driven with twice their rated input power without degradation or damage Highfrequencyelectronics — a critical property for installations where antenna or load conditions cannot always be guaranteed.

Available in both air-cooled and liquid-cooled configurations, and scalable to multi-kilowatt outputs through phase-combined architectures, the UHF SSPA addresses the power and reliability requirements of scientific research infrastructure, industrial RF systems, and ISM band applications.

Key Advantages of LDMOS-Based UHF SSPAs

Extreme Ruggedness Under Mismatch Conditions

LDMOS combines very high RF output power with exceptional ruggedness, making it viable for industrial systems where load impedance cannot always be controlled precisely. Highfrequencyelectronics Reliability under mismatch conditions is superior, with ruggedised LDMOS variants withstanding VSWR up to 65:1 Zrhitech — far exceeding the tolerance of GaN or GaAs alternatives. For scientific and industrial installations where load conditions vary or faults can occur, this ruggedness directly translates to equipment protection and reduced downtime.

CW and Pulsed Operation

LDMOS SSPAs must often withstand harsh mismatch conditions and RF on/off cycling, which is frequently critical in particle accelerator and scientific facility applications. Ampleon Celestia TTI's UHF SSPA supports both continuous wave operation for sustained RF power delivery and pulsed wave modes for applications requiring precise timing control, such as accelerator RF systems and plasma excitation.

Scalable to Multi-Kilowatt Outputs

Individual 500W modules combine in phase to reach output power levels in the multi-kilowatt range, with the same modularity principle used across Celestia TTI's SSPA families. This scalability allows scientific facilities to match the amplifier system precisely to their power requirements, and to expand capacity as programmes evolve.

Air and Liquid Cooling Flexibility

Both forced-air and liquid cooling solutions are available, adapting to the thermal management infrastructure of different installation environments — from rack-mounted laboratory systems with standard forced-air cooling to high-duty-cycle scientific facilities that require liquid cooling for sustained high-power operation.

Built-In Output Protection

An integrated output isolator protects the amplifier against full reflected power — essential in scientific and industrial applications where antenna or cavity mismatches can expose the amplifier to damaging reflected energy during normal operation or fault conditions.

Replacing Legacy Tube Systems

The transition to solid-state power amplifiers is reshaping RF power systems in large scientific facilities — where feasible, replacing tube-based systems with modern solid-state solutions enhances efficiency, reliability, and longevity. Ampleon LDMOS SSPAs at UHF eliminate the periodic tube replacement costs, warm-up delays, and high-voltage handling requirements of legacy klystron and tetrode installations.

Celestia TTI: RF Power Engineering for Science and Industry

Celestia TTI’s science-oriented SSPA product family represents a distinct engineering capability from its SATCOM amplifier portfolio — different semiconductor technology, different cooling architectures, different customer requirements, and different operational profiles. The ability to address both markets reflects the breadth of RF power expertise that nearly 30 years of specialist engineering has built.

LDMOS Engineering Expertise

Designing ruggedised LDMOS SSPAs for CW and pulsed operation at high power levels requires specific expertise in thermal management, impedance matching at sub-GHz frequencies, and protection circuit design for challenging load environments. This is distinct from the GaN engineering behind Celestia TTI’s SATCOM product family — and equally demanding in its own right.

Cooling System Integration

Both air-cooled and liquid-cooled configurations are supported, with Celestia TTI’s engineering team able to specify cooling requirements and integration interfaces for specific installation environments. Scientific facility thermal constraints often dictate liquid cooling — Celestia TTI’s liquid-cooled architecture is designed for this from the ground up.

Phase-Combined Scalability

The modular combination approach that enables multi-kilowatt outputs from 500W building blocks follows the same principles as Celestia TTI’s high-power SATCOM SSPA systems — engineering validated in demanding real-world deployments. For scientific facilities requiring power levels above 500W, phase-combined systems are available.

ISO 9001:2015 Certified Manufacturing

Every UHF SSPA is manufactured under Celestia TTI’s certified quality management system, with documented acceptance testing that scientific facility procurement processes require.

Applications

Application 1: Particle Accelerator RF Systems

Particle accelerators require high-power RF amplifiers to drive the resonant cavities that accelerate charged particles. The transition to solid-state RF power in large scientific facilities is replacing tube-based systems from 50 MHz to 6 GHz, enhancing efficiency, reliability, and longevity across accelerator installations worldwide. Ampleon At 500 MHz, UHF SSPAs address a key frequency range used in proton and ion accelerator RF systems, with LDMOS ruggedness providing the operational reliability that long accelerator run campaigns demand.

Application 2: Plasma Generation Systems

RF plasma systems for semiconductor processing, surface treatment, and scientific research require high-power CW excitation at UHF frequencies. LDMOS SSPAs are well established for particle accelerators, plasma generators, and other ISM band applications, where their tolerance of reactive and variable loads — conditions inherent to plasma processes — makes them the technology of choice over more sensitive alternatives.

Application 3: Industrial RF Heating and Processing

Industrial RF heating applications — including dielectric heating, RF welding, and materials processing at ISM frequencies — require amplifiers that deliver stable high-power CW output into loads that change with material properties and process conditions. LDMOS enables industrial systems that have always been powered by vacuum tubes, replacing them across applications from welding and drying to sealing of plastics.

Medical RF Systems

RF-based medical equipment including MRI gradient amplifiers, RF ablation systems, and diathermy devices operate in frequency ranges where LDMOS is the established technology. Other applications in which LDMOS has a commanding lead include Magnetic Resonance Imaging and other medical systems Highfrequencyelectronics, where predictable linearity, long operational life, and resistance to reflected power protect both the equipment and the patient.

Application 5: Scientific Research and Test Facilities

University research facilities, national laboratories, and specialised test installations require high-power UHF sources for experiments ranging from accelerator physics and plasma science to EMC testing and material characterisation. A standard 19-inch rack-mounted 500W SSPA with CW/pulsed capability and full M&C interface provides the controllable, reliable RF power source these environments demand without the operational complexity of tube-based transmitters.

Frequently Asked Questions

Why is LDMOS technology used instead of GaN for UHF scientific applications?

LDMOS delivers the highest power output up to 1.5 GHz and excels in broadband applications below 1 GHz RF Wireless World, making it the natural choice for UHF ISM and scientific applications at 500 MHz. More importantly, LDMOS withstands VSWR up to 65:1 in ruggedised variants Zrhitech — far beyond GaN’s tolerance — which is critical in scientific and industrial applications where load conditions are variable or unpredictable. LDMOS is also a more mature, cost-effective technology at these frequencies, with decades of operational data from accelerator and industrial deployments validating its long-term reliability.

Continuous Wave (CW) operation delivers a steady, uninterrupted RF output — used in applications requiring constant power delivery such as plasma maintenance, industrial heating, and sustained accelerator cavity excitation. Pulsed Wave (PW) operation delivers RF power in precisely timed bursts — essential for applications requiring defined pulse widths and repetition rates, such as linear accelerator RF structures, radar-adjacent scientific systems, and medical procedures requiring controlled energy deposition. Celestia TTI’s UHF SSPA supports both modes within the same platform.

Yes. Celestia TTI’s 500W UHF modules can be combined in phase to reach multi-kilowatt output power levels. The same modular power combining architecture used in Celestia TTI’s high-power SATCOM systems is applied here, providing the soft-fail behaviour where the loss of one module reduces total output power but does not interrupt operation entirely. Contact Celestia TTI to discuss your specific power requirement and the appropriate combining configuration.

Both forced-air cooling and liquid cooling configurations are available. Air cooling is suitable for standard rack-mounted laboratory and industrial installations. Liquid cooling is recommended for high duty-cycle CW operation where thermal dissipation requirements exceed the practical limits of forced-air systems — a common scenario in continuous operation scientific facilities and high-power industrial installations.

The integrated output isolator absorbs reflected power that would otherwise reach the amplifier’s output stage. In scientific and industrial applications, load impedance can change significantly during operation — plasma ignition, cavity tuning transients, or fault conditions can all generate substantial reflected energy. Without an isolator, this reflected power would enter the amplifier’s transistors directly. The isolator routes reflected energy to a termination load instead, protecting the transistors from damage under full mismatch conditions.

The UHF SSPA provides discrete digital and analog signal interfaces for telemetries, commands, and alarms. These interfaces allow integration into facility-level control systems, SCADA environments, and scientific instrument control frameworks. Contact Celestia TTI for specific interface specifications and custom M&C integration requirements for your installation.

Did you want to know more about our SSPAs for science?

ISO 9001:2015Certified Quality
25+ YearsRF Heritage
100+ EngineersRF Specialists
ESA QualifiedSpace-Grade
5 ContinentsGlobal Clients
Content last reviewed: April 17, 2026 by Celestia TTI Engineering Team