Using ruggedized LDMOS technology, the new CW / PW SSPA family offers outstanding performance in indoor operations
| TYPE | TECHNOLOGY | Psat | FREQUENCY | DATASHEET |
|---|---|---|---|---|
| S band indoor | ||||
| SSPA | LDMOS | 350 W | 3 GHz | Download |
| Parameter | Specification |
|---|---|
| Frequency | 3 GHz |
| Output Power (Psat) | 350 W |
| Technology | LDMOS (Laterally Diffused Metal Oxide Semiconductor) |
| Operation Modes | CW (Continuous Wave) and PW (Pulsed Wave) |
| Configuration | Indoor rack-mount |
| Cooling | Air cooling and liquid cooling options available |
| Modularity | Phase-combined configurations available for multi-kW output |
| Output Protection | Built-in output isolator — full reflected power protection |
| M&C Interface | Discrete digital and analog signal interfaces for telemetries, commands and alarms |
| Linearity | High linearity with customisable linearity characteristics |
Contact Celestia TTI for complete datasheet, phase-combined system configurations and custom specifications.
S band — the frequency range between 2 and 4 GHz — is one of the most demanding environments for high-power RF amplification. Electron linear accelerators for medical radiotherapy and cancer hadrontherapy operate at 2.856–3.0 GHz. Scientific radar systems and ionospheric research installations require high-power S band sources. ISM applications including industrial heating and magnetron driver systems occupy the 2.45 GHz allocation. Each of these environments places specific demands on the amplifier: the ability to operate in continuous wave or precisely timed pulsed modes, tolerance of highly reactive or variable loads, and long operational lifetimes without scheduled tube replacements.
Celestia TTI’s S Band SSPA addresses these requirements with 350W output power at 3 GHz using ruggedised LDMOS technology. S band has long been the dominant frequency space for both scientific linear accelerators and ISM applications — and the established technologies driving these systems have been tube-based klystrons, whose solid-state replacements are now becoming viable for driver-stage and medium-power applications. Microwave Journal Celestia TTI’s LDMOS-based platform provides the robustness, linearity, and operational simplicity that scientific and industrial facilities need from a solid-state alternative to legacy tube technology.
LDMOS is a mature and cost-effective technology with good performance at medium power density requirements across the frequency range relevant to scientific accelerator applications. ScienceDirect Its tolerance of load impedance variations — including the reactive loads presented by RF cavities during tuning and resonance transitions — makes LDMOS the established technology for S band amplifier stages in linac and scientific RF systems.
S band linear accelerators for medical and scientific applications operate at approximately 2.998–3.0 GHz APS, requiring amplifiers that can deliver both sustained CW power for continuous operation modes and precisely timed pulsed RF for beam-triggered accelerator structures. Celestia TTI's S Band SSPA supports both modes within the same hardware platform, simplifying installation and reducing the number of amplifier variants a facility must stock and maintain.
S band linac systems based on solid-state technology require high-power driver stages — with 1 kW or more being a typical requirement for driving klystron-based final output stages in linear accelerators. Microwave Journal Celestia TTI's 350W modules combine in phase to reach multi-kilowatt output levels, providing a scalable path from single-module installations to the power levels demanded by large scientific facilities.
Both forced-air and liquid cooling configurations are supported. Liquid cooling is essential for high duty-cycle CW operation at S band frequencies where the thermal dissipation per unit volume is significant — a standard requirement in continuous-operation scientific facility environments.
An integrated output isolator absorbs reflected power at the output, protecting the LDMOS transistors from the high reflected energy levels that can arise during RF cavity tuning operations, plasma state transitions, or system fault conditions. This protection is built in, not an optional add-on.
The transition to solid-state power amplifiers in large scientific facilities replaces tube-based systems with solutions that enhance efficiency, reliability, and longevity Ampleon — eliminating the periodic cathode replacements, high-voltage power supply risks, and extended warm-up times associated with klystrons and magnetrons. LDMOS SSPAs operate on instant-on solid-state principles with no consumable elements.
Celestia TTI’s engagement with the particle accelerator and scientific facility market extends beyond product supply. The company has participated in R&D programmes for accelerator sub-systems, including development work connected to the European Spallation Source (ESS) in Lund — one of the most powerful neutron sources under construction globally. This track record provides the context and credibility that scientific procurement processes require from an RF power amplifier supplier.
Celestia TTI has developed RF subsystems for accelerator applications, providing a foundation of application knowledge that informs product design and customer support for linac and scientific facility installations.
The science-oriented SSPA product family — covering UHF (500 MHz, 500W) and S band (3 GHz, 350W) — provides complementary frequency coverage across the range used by particle accelerators, plasma systems, and ISM applications. Both products share the same LDMOS platform and cooling architecture.
Multi-kilowatt S band systems are achievable through Celestia TTI’s phase-combined architecture, building on the same combining approach validated in the company’s high-power SATCOM SSPA systems across multiple frequency bands.
Documented quality management and full acceptance testing for every unit — supporting the procurement and quality documentation requirements of scientific facility and institutional customers.
S band linear accelerators operating at approximately 2.998 GHz are the standard technology for medical radiotherapy — delivering high-energy electron and X-ray beams for cancer treatment, including the emerging FLASH radiotherapy technique requiring ultrahigh dose-rate bursts. APS High-power S band SSPAs serve as driver stages for the klystron final output amplifiers in these systems, or as complete solid-state RF sources for lower-power linac structures. Celestia TTI's S Band SSPA at 3 GHz aligns directly with the operating frequency of established linac RF systems.
Hadrontherapy facilities based on compact linacs accelerate protons and light ions for cancer treatment, with S band structures at 3 GHz enabling the high accelerating gradients needed to achieve clinically relevant particle energies in compact facility footprints. Science.gov The RF power systems driving these accelerating structures require high-power S band amplifiers with precise pulsed timing control and the ruggedness to tolerate the variable RF loads presented during beam operations.
The 2.45 GHz ISM allocation — within S band — is used for industrial microwave heating, food processing, RF plasma systems, and materials processing applications. Solid-state SSPA-based sources at S band frequencies are progressively replacing magnetron-based systems in these applications, offering variable power control, longer operational life, and the ability to precisely regulate frequency and output power that magnetrons cannot provide.
S band is a primary frequency allocation for meteorological radar, ionospheric research, and scientific measurement systems. High-power S band SSPAs serve as transmitter stages for these research radars, providing the solid-state reliability and instant-on operation that scheduled scientific observation programmes require — without the warm-up delays and operational complexity of tube-based transmitter technologies.
Universities, national laboratories, and industrial research centres require controllable high-power S band sources for RF characterisation, material testing, antenna measurement, and accelerator component test stands. A rack-mounted 350W CW/pulsed SSPA with discrete M&C interfaces provides the reliable, controllable RF power source these laboratory environments need.
2.856 GHz is the established operating frequency for S band linear accelerating structures, chosen historically to take advantage of the availability of high-power S band klystrons OSTI originally developed for radar and subsequently adopted for accelerator applications. This frequency has become the international standard for medical linac structures — including the widespread Varian and Elekta radiotherapy platforms — and for many scientific electron linacs globally. Celestia TTI’s 3 GHz product addresses this frequency range directly.
In klystron-based linac systems, a solid-state S band SSPA typically serves as the driver stage that provides the input signal to the klystron final amplifier, which then delivers the megawatt-level peak power needed to excite the accelerating cavity. There is a well-established market for kilowatt-level solid-state driver solutions as TWT and tetrode replacements in this application. Microwave Journal In lower-power linac systems — such as compact medical accelerators and research linacs — SSPAs can serve as the complete RF power source, eliminating the klystron entirely.
Both products use LDMOS technology and share the same CW/pulsed operating principle, cooling architecture, and M&C interface approach. The key difference is frequency and target application: the UHF SSPA at 500 MHz addresses particle accelerators at lower frequencies, plasma systems, and industrial heating at UHF ISM bands. The S band SSPA at 3 GHz addresses medical and scientific linac structures operating at the established S band linac frequency, S band radar and research systems, and ISM applications in the 2.45 GHz band. The two products are complementary, not competing.
Yes. Phase-combined configurations allow 350W modules to be combined to reach multi-kilowatt output levels, following the same combining architecture used across Celestia TTI’s SSPA product families. Contact Celestia TTI to discuss your specific power requirement and the appropriate combining configuration.
The S band SSPA provides discrete digital and analog signal interfaces for telemetries, commands, and alarms. These interfaces support integration into accelerator control systems, SCADA environments, and laboratory instrument control frameworks. Contact Celestia TTI for specific interface specifications and custom integration requirements.
Liquid cooling is strongly recommended for sustained high duty-cycle CW operation at full rated power, where thermal dissipation requirements exceed the practical limits of forced-air cooling. For lower duty-cycle pulsed operation or reduced-power CW applications, forced-air cooling may be adequate. Celestia TTI’s engineering team can advise on the appropriate cooling configuration for your specific operating conditions and duty cycle.