Using cutting-edge GaAs technology, the new SSPA/BUC family offers outstanding performance in outdoor operations for civil applications.
| Parameter | Specification |
|---|---|
| Technology | GaAs (Gallium Arsenide) MMIC |
| Output Power (Psat) | 25 W |
| SSPA Frequency | 45–46.5 GHz |
| BUC Frequency | 43–43.5 GHz |
| Configuration | Outdoor |
| Applications | HTS gateway feeder links, government SATCOM uplinks, defence terminals |
Contact Celestia TTI for detailed specifications, M&C interface options and custom configurations.
The satellite communications industry is moving up the frequency spectrum. Ka band gateways are reaching the limits of available spectrum capacity, and the Q band (37.5–42.5 GHz downlink / 42.5–43.5 GHz uplink) and adjacent frequencies represent the next frontier for high-throughput satellite (HTS) feeder links, government broadband, and defence communication systems. Operating at these millimetre-wave frequencies brings abundant available bandwidth — but it demands amplifier technology capable of reliable high-power operation where wavelengths are measured in millimetres and component tolerances in microns.
Celestia TTI’s Q Band SSPA and BUC product family addresses this challenge. Based on GaAs (Gallium Arsenide) MMIC technology — the established and proven semiconductor for millimetre-wave power amplification where precision, linearity, and noise performance are paramount — these outdoor-configured units deliver 25W output power at the Q band uplink frequencies used by both commercial HTS gateway stations and government satellite communication systems. GaAs is widely used in SSPAs at millimetre-wave frequencies in applications requiring moderate output power levels, delivering the linearity and noise characteristics that high-order modulation schemes at Q band demand. Quinstar
At Q band frequencies above 40 GHz, the physical dimensions of RF circuits approach fractions of a millimetre. Producing SSPAs at millimetre-wave frequencies requires a unique blend of mechanical and electrical expertise — at these frequencies, the mechanical design is integral to the electrical design, such that they are one and the same. Quinstar GaAs MMIC technology delivers the gain, linearity, and phase noise characteristics required for the high-order modulation schemes — 16APSK, 32APSK — used in modern HTS gateway uplinks operating under ACM (Adaptive Coding and Modulation).
Two complementary products address the complete Q band uplink chain: the SSPA at 45–46.5 GHz for amplifier-only installations where upconversion is handled separately, and the BUC at 43–43.5 GHz integrating frequency conversion and amplification in a single outdoor-rated unit. This dual product approach gives system integrators the flexibility to match the amplifier configuration to their specific gateway or terminal architecture.
Q band outdoor configurations mount directly at the antenna — minimising the waveguide run between the amplifier output and the dish feed, and eliminating the millimetre-wave waveguide losses that make long indoor-to-outdoor waveguide runs impractical at these frequencies. Outdoor-rated construction ensures reliable operation across the temperature extremes, humidity, and precipitation conditions of gateway installations in diverse geographic locations.
Future very high-throughput satellites are making use of Q and V band gateways where the forward payload feeder link will operate at millimetre-wave frequencies, with technological advancements in GaAs and GaN MMIC technology enabling SSPAs to compete with TWTAs at these bands. CORDIS Celestia TTI's Q band products position operators and system integrators to address this next generation of satellite capacity today.
Gateway stations operating at Q band typically deploy multiple uplink chains in parallel to meet capacity requirements. GaAs MMIC-based SSPAs provide the compact form factor needed for dense multi-chain installations where rack space and antenna mounting positions are at a premium.
Delivering commercially available SSPAs and BUCs at Q band frequencies above 43 GHz requires a level of millimetre-wave MMIC design, precision mechanical fabrication, and system integration capability that most SSPA manufacturers do not maintain. Celestia TTI’s ability to offer these products reflects an RF engineering capability that extends from the ISM band UHF frequencies of its science SSPA portfolio through to the millimetre-wave frontier of Q band.
Celestia TTI’s SSPA product range covers VHF through Q band — a span of more than three decades of frequency that no single-technology supplier can address. Each band requires different semiconductor choices, different circuit design methodologies, and different mechanical precision. This portfolio breadth is the credible evidence of genuine RF engineering depth.
The Q band products use GaAs MMIC technology, while products at other frequency bands use GaN. The ability to select and apply the optimal semiconductor technology for each frequency range — rather than applying a single technology across all bands — reflects the engineering judgement that demanding customers at Q band frequencies require.
Manufacturing quality and process rigour certified for both telecommunications equipment and aerospace/defence technical assistance — relevant for the government and institutional procurement processes that Q band gateway and defence terminal programmes involve.
High-throughput satellites using Q/V band feeder links concentrate their gateway uplinks at ground stations equipped with large-aperture antennas and multi-chain uplink systems. In a typical gateway or teleport station for an HTS system using Q/V band feeder links, uplink transmitters use BUCs and high-power amplifiers to boost the RF signal to the required uplink power before feeding the antenna. Miwv Celestia TTI's Q band BUC at 43–43.5 GHz provides the frequency conversion and amplification needed in these gateway installations, where available Q band spectrum enables satellite operators to relieve congestion from saturated Ka band capacity.
Military satellite terminal variants offer Q band capability enabling communications across government satellite communications networks that operate at millimetre-wave frequencies for high-capacity secure broadband. Microwave Journal The Q band uplink frequencies used by government satellite programmes — including frequencies in the 45–46.5 GHz range — require SSPAs with the precision and linearity characteristics that GaAs MMIC technology delivers, in outdoor configurations suited to deployed and fixed-base government terminals.
The transition of satellite communications to Q and V band frequencies has created demand for Q band RF hardware for research programmes, link budget validation, satellite technology demonstration missions, and ground infrastructure development. Celestia TTI's Q band SSPA and BUC provide operational hardware for these programmes rather than prototype or bespoke laboratory equipment.
Major teleport operators facing spectrum congestion in Ka band are evaluating Q/V band as the next layer of gateway capacity. Early adoption of Q band infrastructure — including the amplifier chains — positions teleport operators to offer Q band services ahead of competitors as Q band satellite capacity is deployed by major satellite operators.
Q band refers to frequencies between approximately 33 and 50 GHz, with the satellite uplink allocation in the 42.5–43.5 GHz range for commercial services and adjacent allocations for government use. Future very high-throughput satellites are making use of Q and V band gateways because the abundant available spectrum at these millimetre-wave frequencies addresses the capacity limitations of lower frequency bands like Ka band, which are becoming congested as satellite broadband demand grows. CORDIS Q band represents the next step in satellite capacity for both commercial HTS operators and government broadband programmes.
At frequencies above 40 GHz, GaAs MMIC technology offers excellent gain, linearity, and phase noise characteristics that are well-matched to the precision requirements of satellite uplink applications using high-order modulation. GaAs is widely used in SSPAs at higher frequencies in applications requiring moderate output power levels Quinstar, and at Q band the 25W output power level of Celestia TTI’s products is well within the range where GaAs delivers reliable performance. The technology choice reflects the specific frequency, power, and application requirements of Q band satellite uplinks rather than a preference for one technology in all contexts.
The SSPA at 45–46.5 GHz is a power amplification-only unit, intended for installations where the frequency upconversion from IF to Q band is handled by a separate upconverter. The BUC at 43–43.5 GHz integrates frequency conversion and amplification in a single outdoor-rated unit, accepting an IF input and delivering Q band RF output directly at the antenna. BUC configurations simplify installation by reducing the number of separate units and interface connections in the uplink chain, but require compatibility between the BUC’s local oscillator frequency and the IF frequency used by the modem.
Celestia TTI’s standard Q band products deliver 25W (Psat) output power. For applications requiring higher power levels, contact Celestia TTI to discuss custom configurations or phase-combined approaches. At millimetre-wave frequencies, power combining becomes increasingly complex as frequency rises, which is why Q band amplifier power levels are typically lower than those available at Ka band and below.
Currently, Celestia TTI’s Q band SSPA and BUC are available in outdoor configurations only. Outdoor installation is generally preferred at Q band because it minimises waveguide losses between the amplifier output and the antenna feed — losses that are proportionally larger at millimetre-wave frequencies than at lower bands, making long indoor-to-outdoor waveguide runs impractical without significant EIRP penalty.