Feeders · Antenna Products

Feeders

Horns with low back radiation and low cross-polarization

Different types of antenna feeders: probes, horns, dipole arrays, radio astronomy feeders… from UHF to milimetric frequency bands

Feeders rf components antennas products 1536x1207 1
POLARIZATION DESCRIPTION FREQUENCY DATASHEET
Linear single Linear-polarized horn antennas 0.55 – 170 GHz Download
Linear dual Dual-linear polarized horn antennas 0.55 – 75 GHz Download
Circular dual Dual-circular polarized corrugated cylindrical horn antennas 10 – 60 GHz Download
Linear single Dual-ridged horn antenna 2 – 18 GHz Download
Linear single Standard gain horn antennas 0.5 – 60 GHz Download
Linear single Open-ended waveguide probes 0.49 – 110 GHz Download
Linear single High crosspolar log periodic dipole array antennas 0.5 – 2 GHz Download

Technical Specifications by Family

Family Freq. Range Polarisation Key Performance
LPHA 0.55–170 GHz Linear single Rotationally symmetric pattern, low back radiation, low cross-polarisation
DLPHA 0.55–75 GHz Linear dual Dual polarisation via OMT + axial corrugated horn, very low cross-polarisation
DCPHA 10–60 GHz Circular dual Dual circular via polariser + OMT, outstanding electrical performance
DRHA 2–18 GHz Linear single High gain, low VSWR, high-precision — EMC reference antenna
SGHA 0.5–60 GHz Linear single High gain, low cross-polarisation, symmetrical patterns — reference testing
OE-RWP 0.49–110 GHz Linear single Low cross-polarisation, lightweight, high-precision — antenna range feed probes
LPDA 0.5–2 GHz Linear single Extremely lightweight, low profile — time-saving test range measurements

Full datasheets available for download above. Contact Celestia TTI for custom frequency ranges, polarisation configurations, and integration with OMT or polariser assemblies.

Precision Feed Horn Antennas from UHF to Millimetre-Wave

The feed horn is the first and last element in every antenna RF chain — the component that couples free-space electromagnetic waves to and from the waveguide system with the lowest possible cross-polarisation, the most symmetric radiation pattern, and the best impedance match across the operating band. In satellite communications, radio astronomy, and antenna measurement, feed horn performance directly determines the quality of every signal processed by the system behind it.

Celestia TTI manufactures a comprehensive family of precision feed horn antennas spanning from UHF to millimetre-wave frequencies, covering seven distinct product families: linear-polarised horn antennas, dual-linear polarised horns, dual-circular polarised corrugated horns, dual-ridged horn antennas, standard gain horns, open-ended waveguide probes, and log-periodic dipole arrays. Each family is designed for a specific performance envelope — from the reference-grade pattern symmetry of corrugated horns used in radio telescope receivers to the broadband gain and EMC measurement accuracy of dual-ridged horns.

Key Advantages

Full Spectrum Coverage — UHF to 170 GHz

A single engineering partner covers feed horn requirements from UHF (0.49 GHz open-ended waveguide probes) through millimetre-wave (170 GHz linear-polarised horns) — spanning every satellite, radio astronomy, and antenna measurement frequency band in a consistent product architecture.

Low Cross-Polarisation as a Design Priority

Corrugated horns have wider bandwidth and smaller sidelobes and cross-polarisation than smooth-wall alternatives, and are widely used as feed horns for satellite dishes and radio telescopes. Celestia TTI's corrugated horn families — LPHA, DLPHA, and DCPHA — achieve the rotationally symmetric patterns and low cross-polarisation levels required for precision satellite feed and radio astronomy receiver applications.

Seven Specialist Families for Specific Applications

Rather than a single generic horn product stretched across multiple uses, Celestia TTI's portfolio addresses distinct application requirements: corrugated horns for maximum pattern purity, dual-ridged horns for broadband EMC and gain reference applications, open-ended waveguide probes for near-field and compact antenna test range (CATR) measurements, and log-periodic dipole arrays for time-efficient VHF/UHF test range work.

Integrated Feed Chain Compatibility

Feed horns in the DLPHA and DCPHA families are designed to integrate directly with Celestia TTI's OMT and polariser products — the DLPHA uses an OMT and axial corrugated horn assembly, the DCPHA adds a polariser for dual circular polarisation. This co-design ensures mechanical compatibility and consistent electrical performance across the assembled feed chain.

Precision CNC Manufacturing

Any precision microwave application — including those associated with radio astronomy — requires feed horns with symmetric E- and H-plane beam patterns that possess low sidelobes and cross-polarisation control. NASA Technical Reports Server Achieving these performance levels demands dimensional accuracy that Celestia TTI's manufacturing processes, certified under ISO 9001:2015, consistently deliver across the frequency range.

Frequency Range on Demand

The LPHA family spans 0.55–170 GHz and OE-RWP probes cover 0.49–110 GHz — ranges that require significant manufacturing capability at millimetre-wave frequencies. Custom frequency ranges and configurations are available across all families for applications not served by the standard portfolio.

Celestia TTI: Feed Horn Engineering Across the Full RF Chain

Feed horns do not perform in isolation. Their radiation pattern determines how efficiently they illuminate a reflector antenna, how much cross-polarisation enters the receive chain, and how accurately an antenna under test can be characterised. Celestia TTI’s position as a manufacturer of feed horns, OMTs, polarisers, and cryogenic LNAs means feed horn design is always considered in the context of the system it serves.

Co-Designed Feed Chain Assemblies

DLPHA and DCPHA families integrate directly with Celestia TTI’s OMT and polariser portfolio. For telescope and earth station projects requiring a complete passive feed chain, Celestia TTI supplies the assembled system — horn, polariser, OMT — tested as a unit.

Scientific Programme Credentials

Celestia TTI has supplied feed horn and cryogenic receiver components for radio telescope projects including SKA band receiver development. This engagement with the most demanding low-noise receiver spe

Millimetre-Wave Manufacturing

The ability to manufacture feed horns to 170 GHz and open-ended waveguide probes to 110 GHz requires precision machining at tolerances measured in microns. Celestia TTI’s manufacturing capability at these frequencies is a genuine differentiator in the European RF component market.

ISO 9001:2015 Certified Quality

Every feed horn is manufactured under Celestia TTI’s certified quality management system, with full dimensional traceability and documented acceptance testing.

Applications

Application 1: Satellite Earth Station Feed Systems

Corrugated feed horns — particularly the DLPHA and DCPHA families — form the primary aperture in earth station and VSAT antenna feed assemblies, directing the satellite signal into the OMT and LNA chain with minimum cross-polarisation contamination. Feed horn performance at this point determines the cross-pol isolation of the entire ground station, directly affecting capacity in frequency-reuse satellite systems.

Application 2: Radio Astronomy Receiver Front-Ends

Horn antennas dedicated to radio astronomy require low cross-polarisation levels and symmetric beam patterns across wide bandwidths arXiv to accurately characterise the polarimetric properties of astronomical sources. Celestia TTI's corrugated horn families provide the pattern purity required for telescope receiver installations, and the engineering team develops custom feed horn designs for specific telescope focal geometries and receiver cryostats.

Application 3: Compact Antenna Test Range (CATR) Feeds

Open-ended waveguide probes (OE-RWP) and corrugated horn antennas are the standard feed sources for near-field and compact antenna test ranges. Their low cross-polarisation and stable phase centres are essential for accurate radiation pattern measurement of antennas under test. Celestia TTI's OE-RWP family covers 0.49–110 GHz, addressing test ranges from VHF through millimetre-wave.

Application 4: EMC and Gain Reference Measurements

The dual-ridged horn antenna (DRHA) family provides high gain, low VSWR, and the measurement precision required for EMC reference antenna applications across 2–18 GHz. Standard gain horn antennas (SGHA) — covering 0.5–60 GHz — provide known, calculable gain for absolute antenna measurement and calibration across a wide frequency range.

Application 5: VHF/UHF Antenna Test Range Efficiency

Log-periodic dipole array (LPDA) antennas offer extremely lightweight, low-profile structures for time-efficient measurements at VHF and lower UHF frequencies (0.5–2 GHz). Their broad bandwidth and compact form factor reduce setup time and equipment complexity in test ranges handling multiple frequency bands at the low end of the microwave spectrum.

Frequently Asked Questions

What is the difference between a corrugated horn and a smooth-wall horn?

A corrugated horn has parallel slots or grooves covering the inside surface of the horn that are small compared to a wavelength. These corrugations produce wider bandwidth, smaller sidelobes, and lower cross-polarisation than smooth-wall alternatives Wikipedia — making corrugated horns the preferred choice for satellite feed and radio astronomy applications where pattern symmetry and polarisation purity are critical. Smooth-wall horns are simpler to manufacture and adequate for many standard applications but cannot match corrugated horn performance at demanding cross-polarisation levels.

Cross-polarisation is the fraction of energy radiated or received in the unintended polarisation. A feed horn with low cross-polarisation couples most of its energy in the intended polarisation, leaving very little contamination in the orthogonal channel. In dual-polarisation satellite systems exploiting frequency reuse, this directly determines the isolation between the two simultaneous channels carried on the same frequency. In radio astronomy, it determines the accuracy of polarimetric measurements of the radio source.

The complete portfolio spans from 0.49 GHz (open-ended waveguide probes) to 170 GHz (linear-polarised horn antennas), covering UHF through millimetre-wave. Individual product families cover different sub-ranges: LPDA antennas address 0.5–2 GHz, dual-ridged horns cover 2–18 GHz, corrugated cylindrical horns cover 10–60 GHz, and LPHA and OE-RWP families extend to 170 GHz and 110 GHz respectively.

Open-ended waveguide probes (OE-RWP) are the standard measurement element in near-field antenna test ranges and compact antenna test range (CATR) systems. Their low cross-polarisation, lightweight construction, and stable phase centre allow accurate sampling of the near-field radiation pattern of an antenna under test, from which the far-field pattern is computed. Celestia TTI’s OE-RWP family covers 0.49–110 GHz, addressing test ranges across a wide frequency spectrum.

Yes. For applications requiring dual-polarisation operation — satellite earth station feeds, radio telescope receivers, and polarimetric test systems — Celestia TTI supplies complete feed chain assemblies comprising the corrugated horn, waveguide polariser, and OMT, all designed for mechanical and electrical compatibility. Contact the engineering team with your frequency band, polarisation configuration, and interface requirements.

Yes. All families can be developed in custom frequency ranges beyond the standard portfolio coverage. Custom physical form factors — for integration into specific cryostats, focal geometries, or compact antenna assemblies — are also available through Celestia TTI’s engineering team.

Did you want to know more about our Passive RF components?

ISO 9001:2015Certified Quality
25+ YearsRF Heritage
100+ EngineersRF Specialists
ESA QualifiedSpace-Grade
5 ContinentsGlobal Clients
Content last reviewed: April 22, 2026 by Celestia TTI Engineering Team